X-Pole XPert (NXN) Powder Coated Black

from 329,90 €

incl. 19% VAT ,

Delivery time : 2 - 3 Workdays

SKU: 1085

For this product you will receive 659.8 Reward Points

Diameter: 40 mm

45 mm
Ceiling Height

Order within the next 2 hours and 50 minutes and 00 seconds and we will ship your order today.

What is the diameter of the ceiling plate/floor plate of the X-Pole pole?

X-Pole XPert SPORT (NS): Ceiling plate = 230mm, Floor plate = 230mm
X-Pole XPert (NX): Ceiling plate = 380mm, Floor plate = 120mm
X-Pole XPert PRO (PX): Ceiling plate = 280mm, Floor plate = 120mm
X-Pole XPert (NXN): Ceiling plate = 280mm, Floor plate = 120mm

How do I choose the right pole diameter?

We generally recommend a pole diameter of 45 mm, which is also commonly used in most studios and competitions. The 40 mm pole diameter is more suitable for people with small hands.

Does the X-Pole cause damage to the floor or ceiling?

The ceiling and floor plates are surrounded by a silicone ring. If this ring is free of dirt/dust, your ceiling and floor will remain clean. Additionally, the silicone ring reliably prevents the occurrence of pressure marks or scratches when the pole is correctly assembled/disassembled. Nevertheless, it is advisable to disassemble the pole between training sessions on sensitive surfaces (structured wallpaper, cork, etc.) to further protect your ceiling/floor from pressure marks.

What type of ceiling/floor is required to securely install an X-Pole?

Installation of the X-Pole is completely unproblematic on solid floors and ceilings. On soft floors (e.g., carpet), it is only recommended to tighten your pole a bit more securely. If you have a lightweight ceiling (e.g., drywall), make sure to place the X-Pole under a load-bearing beam that is at least the width of the ceiling plate. Ceiling beams can best be located by tapping the ceiling. Further information is provided in the X-Pole installation video.

Installation on sloping ceilings or free-hanging beams is also possible; check out our selection of alternative ceiling mounts.

Up to what ceiling height or with how many extensions can I set up an X-Pole?

The basic rule is: the fewer pole elements, the better! So, choose a 1000 mm extension over two 500 mm extensions. The maximum setup height should not exceed 3.38 m. For NXN poles, the maximum setup height is 3.41 m.

If your ceiling height is more than 3.40 m, we can alternatively recommend our selection of studio poles. Feel free to contact our customer service; we will try to find a suitable solution for you.

X-Pole

X-Pole stands for empowerment, strength and fitness. With X-Pole by your side, you will grow beyond yourself! To support you, X-Pole has developed high-quality dance poles and aerial equipment with the highest level of quality and safety, catapulting itself to the top of the world in this segment.

Cool style thanks to modern colors
Stronger grip than chrome, stainless steel or brass plating
Especially suitable for slipping hands
Also for people with nickel allergies
More pleasant and "warmer" feeling on the skin
Clean with a damp microfiber cloth

Weight: 19 kg
Function: Spinning, Static
Diameter base plate: 12 cm
Diameter cover plate: 28 cm

This Is X-Pole - Beyond The Expected

What is the diameter of the top plate/base plate of the X-Pole Home Poles?

X-Pole XPert SPORT (NS): top plate = 230mm, base plate = 230mm
X-Pole XPert (NX): top plate = 380mm, base plate = 120mm
X-Pole XPert PRO (PX): top plate = 280mm, base plate = 120mm
X-Pole XPert (NXN): top plate = 280mm, base plate = 120mm

How do I choose the right pole diameter?

We recommend the standard pole diameter of 45 mm. This is also used in most studios and competitions. The 40 mm pole diameter is more suitable for people with small hands.

Will the X-Pole damage the floor or ceiling?

The top and bottom plates are surrounded by a silicone ring. If this ring is free of dirt/dust, your ceiling and floor will also stay clean. In addition, the silicone ring reliably prevents the formation of pressure points or scratches when the poles are assembled and disassembled correctly. Nevertheless, it is advisable to remove the poles between training sessions on sensitive surfaces (textured wallpaper, cork, etc.). This also protects your ceiling/floor from pressure points.

What kind of ceiling/floor is necessary to set up an X-Pole safely?

In the case of solid floors and ceilings, the construction of the X-Pole is completely unproblematic. With soft floors (e.g. carpet) it is only advisable to clamp your poles a little tighter. If you have a lightweight ceiling (e.g. Rigips), make sure to place the X-Pole under a load-bearing beam that is at least as wide as the ceiling plate. The best way to find the ceiling beams is to tap the ceiling. More on this is explained in the X-Pole assembly video.

Mounting on sloping ceilings or free-hanging beams is also possible, check out our selection of alternative ceiling mounts.

Up to what ceiling height or with how many extensions can I set up an X-Pole?

The basic rule is: the fewer pole elements, the better! So it is better to choose one 1000 mm than two 500 mm extensions. The maximum construction height should not exceed 3.38 m. With the NXN poles, the maximum construction height is 3.41 m.

If your ceiling height is more than 3.40 m, we can alternatively recommend our selection of studio poles. You are also welcome to contact our customer service, we will try to find a suitable solution for you.

X-Pole XPert (NXN) Powder Coated Black - The Professional Dance Pole with Spinning-Mode

The X-Pole XPert (NXN) 2021 is used by the best professional dancers of the world and is equipped with the latest pole technology. Pole athletes of all performance classes rely on the quality of the X-Pole brand. The X-Pole XPert is the first dance pole to be installed from the ground, which can be switched between static and spinning mode. The XPert can be mounted without a ladder and can be flexibly adapted to all common ceiling heights.

Information about the Finish:

Powder coated Dance Poles are relatively new to the market. These poles have a stronger grip than any other variant like chrome, stainless steel or brass. Therefore, this model is particularly suitable for people who have to fight with slippery hands on the pole. For advanced athletes, who also want to train drops from full height, the grip can be a bit too strong. Due to the coating, this variant is also suitable for people who have a nickel allergy. Powder-coated bars feel less cold, which is especially appreciated in winter.

The features of the X-Pole XPert (NXN) 2021 at a glance:

Can be installed from the ground - A ladder is not needed
Patented X-Joint Technology - Easy and quick to build, very safe
No annoying transitions between the pole elements
Can be used static or spinning - easy to change
Flexible base plate compensates for unevenness of the floor
Equipped with the PRO ceiling plate for a slimmer design and increased stability
Available in 40 mm and 45 mm diameter
In the standard set suitable for ceiling heights from 2.30 m to 2.78 m
With extensions up to 3.41 meters ceiling height (simply select ceiling height above)
he set contains all necessary tools
No drilling in the ceiling or floor necessary